[vc_row][vc_column][vc_custom_heading text=”Short Circuit Studies” font_container=”tag:h2|text_align:center”][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][vc_column_text]
Short circuit study is the process of analyzing an electrical system to determine the magnitude of fault currents that flow during a fault and comparing the obtained values with the ratings of installed equipment and short circuit protection devices. Short circuit analysis is an extensive engineering calculation that is performed using software such as ETAP, SKM, or NEPLAN to obtain accurate results.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_empty_space][vc_single_image image=”411″ img_size=”large” alignment=”center”][vc_empty_space][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]
Short circuit analysis is performed to ensure that existing and new equipment ratings are sufficient to withstand the available short circuit current. This analysis can be done through hand calculations or known software such as NEPLAN, which allows for quick and effective short circuit studies on electrical systems in four steps:
➢ Data collection and SLD preparation
➢ Short circuit calculations
➢ Relay coordination studies
➢ Load flow analysis.
These studies must follow IEEE standards and are necessary for larger systems to perform short circuit calculations for both switch gear ratings and relay settings. Knowledge of computational methods of power system analysis is essential for engineers responsible for planning, designing, operating, and troubleshooting distribution systems. A short-circuit study SAMYUJ SDN BHD-COMPANY PROFILE determines the magnitude of the currents that flow during an electrical fault and compares these calculated values against equipment ratings, ensuring that the power system is safely protected. Once expected short circuit currents are known, a protection coordination study determines the optimum characteristics, ratings, and settings of power system protective devices.
Our short circuit analysis service:
✓ Is done with support of IEC 60909 (including 2016 edition), IEEE 141/ANSI C37, VDE 0102/0103, G74 and IEC 61363 norms and methods
✓ Is calculation of short-circuit currents in DC grids according to IEC 61660 and ANSI/IEEE 946
✓ We do complete superposition method, including dynamic voltage support of generators connected via power electronics
✓ Multiple fault analysis of any kind of fault incl. single-phase interruption, inter-circuit faults, fault sweep along lines, etc.[/vc_column_text][/vc_column][/vc_row]